
Pepperl+Fuchs
Sensor industrial Pepperl+Fuchs NCB4-12GM60-B3-V1
SKU: PEPPER-NCB4-12GM60-B3-V1
Sensor industrial Pepperl+Fuchs modelo NCB4-12GM60-B3-V1.
$2,657.03
En existencia
Descripción técnica
**Sensor industrial Pepperl+Fuchs NCB4-12GM60-B3-V1**
Sensor industrial Pepperl+Fuchs modelo NCB4-12GM60-B3-V1.
### Descripción del fabricante
Comfort series. Cylindrical. NO/NC selectable. On/Off delay (disconnectable). Switching function: Normally open/closed (NO/NC) programmable, Output type: AS-Interface, Installation: flush, Output type: 2-wire, Thread mold: M12, Construction type: Cylindrical, thread, Series: Cylindrical type, Operating voltage: 26.5 ... 31.9 V via AS-i bus system, Type of voltage: DC, Connection type: Connector plug, Housing material: Stainless steel 1.4305 / AISI 303, Degree of protection: IP67, Threading: M12 x 1
**Entrega estimada:** 1 a 3 días hábiles (en existencia).
Fuente: [Pepperl+Fuchs (sitio oficial)](https://www.pepperl-fuchs.com/en-us/products-gp25581/45181)
Categoría: Sensores y detección
Especificaciones
| General | |
|---|---|
| Función de conmutación | Normally open/closed (NO/NC) programmable |
| Tipo de salida | AS-Interface |
| Distancia nominal de operación | 4 mm |
| Instalación | flush |
| Assured operating distance | 0 ... 3.24 mm |
| Actual operating distance | 3.6 ... 4.4 mm typ. 4 mm |
| Reduction factor r Al | 0.23 |
| Reduction factor r Cu | 0.21 |
| Reduction factor r 304 | 0.7 |
| Node type | Standard node |
| AS-Interface specification | V2.1 |
| Required gateway specification | ≥ V2.1 |
| Voltaje de operación | 26.5 ... 31.9 V via AS-i bus system |
| Frecuencia de conmutación | 0 ... 500 Hz |
| Hysteresis | 1 ... 15 % typ. 5 % |
| Reverse polarity protection | reverse polarity protected |
| Voltage drop I L = 20 mA, switching element on | 3.4 ... 5 V typ. 4.3 V |
| No-load supply current | ≤ 25 mA |
| Time delay before availability | ≤ 1000 ms |
| Switching state indicator | dual-LED, yellow |
| Error indicator | dual-LED, red |
| MTTF d | 2140 a |
| Mission Time (T M ) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Standards | EN IEC 60947-5-2 |
| Aprobación UL | cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 31.9 V DC |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Temperatura ambiente | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Tipo de conexión | Connector plug |
| Material de carcasa | Stainless steel 1.4305 / AISI 303 |
| Sensing face | PBT |
| Grado de protección | IP67 |
| Threading | M12 x 1 |
| Número de pines | 4 |
| Largo | 60 mm |
| Diámetro | 12 mm |



