
Pepperl+Fuchs
Sensor inductivo Pepperl+Fuchs NJ4-12GM40-E2
SKU: PEPPER-NJ4-12GM40-E2
Sensor inductivo Pepperl+Fuchs modelo NJ4-12GM40-E2.
$2,132.64
Últimas 5 piezas
Descripción técnica
**Sensor inductivo Pepperl+Fuchs NJ4-12GM40-E2**
Sensor inductivo Pepperl+Fuchs modelo NJ4-12GM40-E2.
### Descripción del fabricante
4 mm non-flush. Switching function: Normally open (NO), Output type: PNP, Installation: non-flush, Output polarity: DC, Output type: 3-wire, Thread mold: M12, Construction type: Cylindrical, thread, Series: Cylindrical type, Type of voltage: DC, Connection type: cable, Housing material: Stainless steel 1.4305 / AISI 303, Degree of protection: IP67, Material: PUR
**Entrega estimada:** 1 a 3 días hábiles (en existencia).
Fuente: [Pepperl+Fuchs (sitio oficial)](https://www.pepperl-fuchs.com/en-us/products-gp25581/75583)
Categoría: Sensores y detección
Especificaciones
| General | |
|---|---|
| Función de conmutación | Normally open (NO) |
| Tipo de salida | PNP |
| Distancia nominal de operación | 4 mm |
| Instalación | non-flush |
| Output polarity | DC |
| Assured operating distance | 0 ... 3.24 mm |
| Actual operating distance | 3.6 ... 4.4 mm typ. |
| Reduction factor r Al | 0.37 |
| Reduction factor r Cu | 0.36 |
| Reduction factor r 304 | 0.74 |
| Voltaje de operación | 10 ... 60 V |
| Frecuencia de conmutación | 0 ... 2000 Hz |
| Hysteresis | 1 ... 10 % typ. 3 % |
| Reverse polarity protection | reverse polarity protected |
| Short-circuit protection | pulsing |
| Voltage drop | ≤ 3 V |
| Voltage drop I L = 100 mA, switching element on | 1.2 ... 2.5 V |
| Operating current | 0 ... 200 mA |
| Off-state current | ≤ 0.5 mA |
| No-load supply current | ≤ 9 mA |
| Time delay before availability | ≤ 20 ms |
| Switching state indicator | LED, yellow |
| MTTF d | 750 a |
| Mission Time (T M ) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Standards | EN IEC 60947-5-2 |
| Aprobación UL | cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 60 V DC Output Switching Current: 200 mA |
| CCC approval | Certified by China Compulsory Certification (CCC) |
| Temperatura ambiente | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Tipo de conexión | cable |
| Material de carcasa | Stainless steel 1.4305 / AISI 303 |
| Sensing face | PBT |
| Grado de protección | IP67 |
| Wire end ferrules | yes |
| Cable diameter | 4.8 mm ± 0.2 mm |
| Bending radius | > 10 x cable diameter |
| Material | PUR |
| Color | black |
| Number of cores | 3 |



