
Pepperl+Fuchs
Sensor industrial Pepperl+Fuchs NMB10-18GM65-E2-V1
SKU: PEPPER-NMB10-18GM65-E2-V1
Sensor industrial Pepperl+Fuchs modelo NMB10-18GM65-E2-V1.
$2,993.60
Últimas 3 piezas
Descripción técnica
**Sensor industrial Pepperl+Fuchs NMB10-18GM65-E2-V1**
Sensor industrial Pepperl+Fuchs modelo NMB10-18GM65-E2-V1.
### Descripción del fabricante
10 mm flush. Stainless steel sensing face. Increased operating distance. Metal face proximity sensors, metal face, Switching function: Normally open (NO), Output type: PNP, Installation: flush (Requirements: see drawing below), Output polarity: DC, Output type: 3-wire, Thread mold: M18, Construction type: Cylindrical, thread, Series: Cylindrical type, Operating voltage: 10 ... 30 V DC, Type of voltage: DC, Connection type: Connector plug, Housing material: Stainless steel 1.4305 / AISI 303, Degree of protection: IP67, Threading: M12 x 1
**Entrega estimada:** 1 a 3 días hábiles (en existencia).
Fuente: [Pepperl+Fuchs (sitio oficial)](https://www.pepperl-fuchs.com/en-us/products-gp25581/40499)
Categoría: Sensores y detección
Especificaciones
| General | |
|---|---|
| Función de conmutación | Normally open (NO) |
| Tipo de salida | PNP |
| Distancia nominal de operación | 10 mm |
| Instalación | flush (Requirements: see drawing below) |
| Output polarity | DC |
| Assured operating distance | 0 ... 8.1 mm |
| Actuating element | Ferrous and nonferrous targets |
| Reduction factor r Al | 0.4 |
| Reduction factor r Cu | 0.25 |
| Reduction factor r 304 | 0.85 |
| Reduction factor r St37 | 1 |
| Voltaje de operación | 10 ... 30 V DC |
| Frecuencia de conmutación | 0 ... 240 Hz |
| Hysteresis | 3 ... 15 typ. 5 % |
| Reverse polarity protection | reverse polarity protected |
| Short-circuit protection | pulsing |
| Voltage drop | ≤ 2 V |
| Operating current | ≤ 200 mA |
| Off-state current | ≤ 10 µA |
| No-load supply current | ≤ 15 mA |
| Operating voltage indicator | LED, green |
| Switching state indicator | LED, yellow |
| MTTF d | 847 a |
| Mission Time (T M ) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Standards | EN 60947-5-2:2007 IEC 60947-5-2:2007 |
| Aprobación UL | cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 200 mA |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Temperatura ambiente | -25 ... 70 °C (-13 ... 158 °F) |
| Tipo de conexión | Connector plug |
| Material de carcasa | Stainless steel 1.4305 / AISI 303 |
| Sensing face | Stainless steel 1.4305 / AISI 303 |
| Grado de protección | IP67 |
| Threading | M12 x 1 |
| Número de pines | 4 |
| Largo | 65 mm |
| Diámetro | 18 mm |



