
Pepperl+Fuchs
Sensor industrial Pepperl+Fuchs NRB4-12GS40-E2-V1
SKU: PEPPER-NRB4-12GS40-E2-V1
Sensor industrial Pepperl+Fuchs modelo NRB4-12GS40-E2-V1.
$2,561.67
Últimas 3 piezas
Descripción técnica
**Sensor industrial Pepperl+Fuchs NRB4-12GS40-E2-V1**
Sensor industrial Pepperl+Fuchs modelo NRB4-12GS40-E2-V1.
### Descripción del fabricante
Reduction factor = 1. Magnetic field resistant. Stainless steel housing. Reduction factor 1, magnetic field resistant, Switching function: Normally open (NO), Output type: PNP, Installation: flush, Output polarity: DC, Output type: 3-wire, Thread mold: M12, Construction type: Cylindrical, thread, Series: Cylindrical type, Operating voltage: 10 ... 30 V DC, Type of voltage: DC, Connection type: Connector plug, Housing material: Stainless steel 1.4305 / AISI 303, Degree of protection: IP67, Threading: M12 x 1
**Entrega estimada:** 1 a 3 días hábiles (en existencia).
Fuente: [Pepperl+Fuchs (sitio oficial)](https://www.pepperl-fuchs.com/en-us/products-gp25581/69936)
Categoría: Sensores y detección
Especificaciones
| General | |
|---|---|
| Función de conmutación | Normally open (NO) |
| Tipo de salida | PNP |
| Distancia nominal de operación | 4 mm |
| Instalación | flush |
| Output polarity | DC |
| Assured operating distance | 0 ... 3.24 mm |
| Reduction factor r Al | 1 |
| Reduction factor r Cu | 1 |
| Reduction factor r 304 | 1 |
| Reduction factor r St37 | 1 |
| Voltaje de operación | 10 ... 30 V DC |
| Frecuencia de conmutación | 0 ... 2000 Hz |
| Hysteresis | typ. 5 % |
| Reverse polarity protection | reverse polarity protected |
| Short-circuit protection | pulsing |
| Voltage drop | ≤ 2 V |
| Rated insulation voltage | 60 V |
| Operating current | 0 ... 200 mA |
| Off-state current | 0 ... 0.5 mA typ. 0.1 µA at 25 °C |
| No-load supply current | ≤ 14 mA |
| Time delay before availability | max. 15 ms |
| Constant magnetic field | 200 mT |
| Alternating magnetic field | 200 mT |
| Switching state indicator | Multihole-LED, yellow |
| MTTF d | 1393 a |
| Mission Time (T M ) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Standards | EN IEC 60947-5-2 |
| Clase de protección | II |
| Rated impulse withstand voltage | 800 V |
| Aprobación UL | cULus Listed Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 200 mA |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Temperatura ambiente | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Tipo de conexión | Connector plug |
| Material de carcasa | Stainless steel 1.4305 / AISI 303 |
| Sensing face | PBT |
| Grado de protección | IP67 |
| Threading | M12 x 1 |
| Número de pines | 3 |



