
Pepperl+Fuchs
Sensor retrorreflectivo Pepperl+Fuchs OBG5000-R100-2EP1-IO-V3
SKU: PEPPER-OBG5000-R100-2EP1-IO-V3
Sensor retrorreflectivo Pepperl+Fuchs modelo OBG5000-R100-2EP1-IO-V3.
$3,495.79
En existencia
Descripción técnica
**Sensor retrorreflectivo Pepperl+Fuchs OBG5000-R100-2EP1-IO-V3**
Sensor retrorreflectivo Pepperl+Fuchs modelo OBG5000-R100-2EP1-IO-V3.
### Descripción del fabricante
Retroreflective sensor with polarization filter for clear object detection, Miniature design with versatile mounting options, Detects transparent objects, i.e., clear glass, PET and transparent films, Two machines in one: clear object detection or reflection operating mode with long range, High degree of protection IP69K, IO-Link interface for service and process data
**Entrega estimada:** 1 a 3 días hábiles (en existencia).
Fuente: [Pepperl+Fuchs (sitio oficial)](https://www.pepperl-fuchs.com/en/products-gp25581/73319)
Categoría: Sensores y detección
Especificaciones
| General | |
|---|---|
| Effective detection range | 0 ... 3.5 m in TEACH mode |
| Reflector distance | 0 ... 3.5 m in TEACH mode |
| Threshold detection range | 6 m |
| Reference target | H85-2 reflector |
| Fuente de luz | LED |
| Light type | modulated visible red light |
| LED risk group labelling | exempt group |
| Diameter of the light spot | approx. 170 mm at a distance of 3.5 m |
| Opening angle | approx. 5 ° |
| Ambient light limit | EN 60947-5-2 |
| MTTF d | 600 a |
| Mission Time (T M ) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Operation indicator | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
| Function indicator | Yellow LED: Permanently lit - light path clear Permanently off - object detected Flashing (4 Hz) - insufficient operating reserve |
| Control elements | Teach-In key |
| Contrast detection levels | 10 % - clean, water filled PET bottles 18 % - clear glass bottles 40 % - colored glass or opaque materials Adjustable via rotary switch |
| Voltaje de operación | 10 ... 30 V DC |
| Ripple | max. 10 % |
| No-load supply current | < 25 mA at 24 V supply voltage |
| Clase de protección | III |
| Interface type | IO-Link ( via C/Q = pin 4 ) |
| IO-Link revision | 1.1 |
| Device ID | 0x110A01 (1116673) |
| Transfer rate | COM2 (38.4 kBit/s) |
| Min. cycle time | 2.3 ms |
| Process data width | Process data input 2 Bit Process data output 2 Bit |
| SIO mode support | yes |
| Compatible master port type | A |
| Switching type | The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on |
| Signal output | 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected |
| Switching voltage | max. 30 V DC |
| Switching current | max. 100 mA , resistive load |
| Usage category | DC-12 and DC-13 |
| Voltage drop | ≤ 1.5 V DC |
| Frecuencia de conmutación | 500 Hz |
| Tiempo de respuesta | 1 ms |
| Communication interface | IEC 61131-9 |
| Product standard | EN 60947-5-2 |
| Aprobación UL | E87056 , cULus Listed , class 2 power supply , type rating 1 |



