
Sensor industrial Pepperl+Fuchs NMB6-12GH50-E2-V1
SKU: PEPPER-NMB6-12GH50-E2-V1
Sensor industrial Pepperl+Fuchs modelo NMB6-12GH50-E2-V1.
- Entrega estimada: 1–3 días hábiles
- Envío asegurado en pedidos de alto valor
- Peso: 0.07 kg
- Medidas: 10 × 6 × 5 cm
Descripción técnica
Sensor industrial Pepperl+Fuchs NMB6-12GH50-E2-V1
Sensor industrial Pepperl+Fuchs modelo NMB6-12GH50-E2-V1.
Descripción del fabricante
6 mm flush. Active surface metal. One-piece housing with stainless steel (V4A; 1.4435). Metal face proximity sensors, metal face, Switching function: Normally open (NO), Output type: PNP, Installation: flush in mild steel, Output polarity: DC, Output type: 3-wire, Thread mold: M12, Construction type: Cylindrical, thread, Series: Cylindrical type, Type of voltage: DC, Connection type: Connector plug, Housing material: Stainless steel 1.4435 / AISI 316L, Degree of protection: IP68 / IP69K, Threading: M12 x 1
Entrega estimada: 1 a 3 días hábiles (en existencia).
Fuente: Pepperl+Fuchs (sitio oficial)
Categoría: Sensores y detección
Especificaciones
| General | |
|---|---|
| Función de conmutación | Normally open (NO) |
| Tipo de salida | PNP |
| Distancia nominal de operación | 6 mm |
| Instalación | flush in mild steel |
| Output polarity | DC |
| Assured operating distance | 0 ... 4.86 mm |
| Reduction factor r Al | 1 |
| Reduction factor r Cu | 0.85 |
| Reduction factor r 304 | 0.5 (0.9 of material thickness 2 mm) |
| Reduction factor r St37 | 1 |
| A | 0 mm |
| B | 6 mm |
| C | 18 mm |
| F | 50 mm |
| Voltaje de operación | 10 ... 30 V |
| Frecuencia de conmutación | 0 ... 600 Hz |
| Hysteresis | 3 ... 15 typ. 5 % |
| Reverse polarity protection | yes |
| Short-circuit protection | yes |
| Voltage drop | ≤ 2 V |
| Operating current | 0 ... 200 mA |
| Off-state current | ≤ 0.1 mA |
| No-load supply current | ≤ 10 mA |
| Time delay before availability | ≤ 40 ms |
| Switching state indicator | LED, yellow |
| Operating pressure statically | 80 bar (1160.3 psi) max. |
| MTTF d | 652 a |
| Mission Time (T M ) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Standards | EN IEC 60947-5-2 |
| Aprobación UL | cULus Listed |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Temperatura ambiente | -25 ... 85 °C (-13 ... 185 °F) |
| Tipo de conexión | Connector plug |
| Material de carcasa | Stainless steel 1.4435 / AISI 316L |
| Sensing face | Stainless steel 1.4435 / AISI 316L |
| Grado de protección | IP68 / IP69K |
| Threading | M12 x 1 |
| Número de pines | 4 |
| Mass | 24 g |
Productos relacionados

Sensor industrial Omron E2E-X2B1D12-M1
Entrega: 1–3 días hábiles

Sensor fotoeléctrico compacto Omron E3Z-R86
Entrega: 10–15 días hábiles

Sensor industrial SICK WFM30-40P321
Entrega: 10–15 días hábiles

Sensor industrial SICK WTB9-3P2461
Entrega: 1–3 días hábiles